Autel Maxisys Ultra 是 MK908P / MS908P / Elite / MS909 / MS919 的更新版本。它是一款一体式综合扫描仪，具有 5 合 1 VCMI、高级编程和编码功能以及 36 种以上大型维修车间的服务功能，支持市场上 99.99% 品牌的更广泛车辆覆盖（无 IP 限制）。特别是，它支持一些新的 2021 和 2022 车型，包括 GM、Toyota、VW、JLR、Nissan 和 BMW。

通用汽车：

*   Adds ECU Information, Read Codes, Erase Codes, Live Data, Active Test, and Special Function for 33 models in 2022 including Cadillac CT4, Buick Envision, and Chevrolet Blazer.
*   Adds 5 hot special functions: Automatic Start/Stop, Transport Mode, A/C, Rain/Light Sensor, and EGR.

Toyota:

*   Adds basic functions for 41 models in 2021 (including Yaris, and 4Runner), and 9 models in 2022 (including Corolla, and Hilux).
*   Adds 3 types of Service function: ACC, A/C, and HV Battery.

VW:

*   Adds diagnostic supports for models including ID.6 X 2021, ID.6 Crozz 2021, Audi Q4 e-tron 2022, and CP – Tarek 2021.
*   Updates basic functions, and special functions (including Oil Reset, EPB, and Odometer), supporting models up to 2022.
*   Adds 258 hot guided functions including Battery, Headlight Washer, and Transport Mode.
*   Adds Topology for makes including VW, Audi, Skoda, and Seat. [For MaxiSys Ultra, MaxiSys MS919 and MaxiSys MS909 only]

JLR:

*   Adds basic functions for 2022 PHEV models (Jaguar XE and Jaguar XF) and 2021 onward PHEV models (Discovery Sport and New Range Rover Evoque).
*   Adds 35 special functions including Power Supply Service Mode Diagnostic, Purge Valve Self Test, Fuel System Leak Check (DMTL), and Fuel Tank – Smoke Test for 2017 onward models.

Nissan:

* 新增2021年23款（包括Kicks、Versa、Infiniti）和2022年10款（包括Armada、Pathfinder、Frontier）的基本功能。
* 为 DTC 增加 1310 项特殊功能，包括 P0440 / P1440 - EVAP（小泄漏）、P1274 - 空燃比传感器 1 和 P0134 - 加热氧传感器 (HO2S) 1。
* 增加热特殊功能：HV 电池。支持锂离子电池容量平衡、清除电池逐渐容量损失、清除电池充电/放电信息数据等功能。

宝马：

* 优化基本功能，支持至2021年7月的车型。
* 增加7个热门特殊功能：运输模式、HV电池、ACC、A/C、雨/光传感器、EGR和FRM重置。
* 新增G22、G82等4种底盘机型的基本功能和特殊功能。
* 支持 2021 年 3 月前 F/G 底盘车型的 ECU 编程版本。

查看更多车型，请访问 https://www.auteltech.com/vehicle-coverage/coverage2。

请注意：
以上所列新车型号也兼容 Autel MS909 和 MS919。

An error occurred while a customer was using the Yanhua Digimaster 3. Our technician provided the appropriate solution. If you have the same problem too, hope it helps.

Customer problem:

When I tried to correct my car’s odometer with the Digimaster 3, the message Device not found was displayed on the screen. I couldn’t correct the kilometers.

Obd2tool.com engineer solution:

You did not weld the odometer’s chip to the OBP adapter, the board you connected to Digimaster 3 was blank, so the device cannot be found and no information can be read. Please remove the chip from the odometer and sell it to the board, then try again.

This article is to guide customers through the whole process of All Keys Lost for a Mercedes with Autel IM608 Scanner. We need to do some necessary preparation before this All Keys Lost for a Mercedes Programming Test.

What tools are needed:
G-box, XP400 Pro, cable to connect XP400 Pro with EIS component, JVCI, JVCI cable
Make sure the network connection is good and follow the instructions for key learning with all keys lost.

Select the model type of “Mercedes Benz”, tap “Smart selection”>>All Keys Lost (Fast)>>On Bench (G-box Fast)

Since we are working on bench, we don’t need to read VIN.
We can check EIS number on the EIS and select it on screen. In this case, it is 209.
So tap “W209/2006-”, it will come to a Note like this:

Connect the power adapter to the G-box, follow the below diagram to connect the wires to EIS component.

You still have to connect the JVCI and JVCI cable to the G-box.
Ready to begin now!
Follow the instructions on the screen and enter a blank key into the XP400 Pro.

It will begin communicating the key. Please wait…

If there is no password for the key, tap “NO”. Then you will have to enter “Password Calculation process”.

Please strictly follow this:

This Password Calculation process will take about 5 minutes.

Success!

Once the Password Calculation process is completed, the key learning process will just take a few more seconds.

It is now at generating key file>>Write BE key file

Follow this step until it is done.

All keys lost completed!

The G-box makes the All Keys Lost process much simpler when working with a Mercedes.

A big success in all keys lost programming with Autel IM608 professional scanner.

If your car / truck key is lost or the key fob is broken, getting a replacement can be a chore and it can cost a pretty penny depending on the type of vehicle you drive. A car key programmer enables you to reprogram keys, program new keys, and set up the IMMO system so that you are ready to use again. This saves you time and money. Some automotive scan tools have important programming functions built in. These models are often designed for experienced DIY enthusiasts or professionals. A standalone key programmer is a lower cost option for drivers or locksmiths who do not require scan tools functionality. I will make sure that after reading these instructions you will find a suitable one for your car key. Choose the type you want and go with me!

1. Xhorse VVDI key programmer

The Xhorse VVDI key programmer is a professional tool that can perform multiple functions. It is equipped with Bluetooth and WIFI connectivity for communication to the Xhorse key cutting machine, mini OBD tool, and other subsidiary products needed for other purposes. The main strength of Xhorse VVDI is that it can perform remote key programming, making it ideal for roadside operations.

VVDI key programmer comes with a 3375mAh battery, HD LCD screen, and a camera to make its operation easy and interactive. The MINI OBD tool that it uses supports different vehicle models, including imported ones.

Its main functions include:
*   Generate remote and smart key
*   Program and IMMO transponder
*   Generate special transponder
*   Renew remote
*   Recognize and copy access card
*   Generate and copy garage remote
*   Frequency detection and copy remote
*   Connect to Xhorse key cutting machine
*   Special functions (VVDI Special TP, Unlock Toyota Smart Key, Special 4D to 4C, ID63 to ID83, VVDI smart key clone, VVDI remote repair calibration, etc.)

The VVDI key tool doesn’t support many US cars and other vehicle models worldwide. Its use is limited to just a section of vehicle brands and supports only models manufactured in specific years. For example, it works on Ford explorer 2011 and not the 2010 model. It also doesn’t work for most Honda keys and remotes. The Nissan OEM key clone is also not supported.

2. AUTEK iKEY820

AUTEK iKEY820 is a professional auto key programming tool with unrivaled IMMO capability. It can read mixed data from almost any car model, making it the best tool for locksmiths, garage, and car body repair centers. AUTEK iKEY820 has an interactive user interface that makes it easy to operate. Even beginners can find it easy to use in performing IMMO functions.

AUTEK iKEY820 is best known for key programming and does not have token limitations. The tool comes preloaded with 500 tokens, but you can always charge up to 200 for free.

This key programmer does not require an additional power source to operate. It is a plug-and-play tool that uses an OBD2 port to perform any required key programming functions, which include the following:

*   Provide Roadside key & Remote Programming for Drivers
*   Read & Clear Fault Codes
*   Clear key Memory
*   Program Proximity & Non-Proximity Keys
*   Program Smart Keys
*   Program Plip Keys
*   Program Aftermarket & OEM keys
*   Program Aftermarket & OEM Remote Key Fobs
*   Read Immobilizer Pin-Codes from Engine ECU or Body Control Module
*   Read Pre-Code data from engine ECU or Body Control Module

The Autek ikey820 cannot automatically read the pin information from all vehicle models. It supports quite a number, but you still need to source pin codes for some vehicles. A key programmer of this level should have been equipped with the full capability to handle all functions related to IMMO services.

The Autek ikey820 is also relatively heavy. It has a net weight of 1.5 Kg, which makes operation with one hand nearly impossible.

3. Ck100 universal key programmer

CK100 is a cost-effective key programmer for beginners. It has many IMMO functions and covers a wide range of vehicles worldwide. It is made of high-quality ABS material, making it suitable for use under different conditions.

The CK100 key programmer comes with a 1024 token, which can be updated for free once depleted. However, it has none for some cars. That can be viewed as a disadvantage if you handle different vehicle brands and models. It can also fail to adapt keys when in use. In such cases, users are supposed to disconnect the OBD16 adapter and reconnect after 10 seconds.

CK100 has the following features and functions:

*   Program a replacement button.
*   Read the key from the anti-theft lock memory
*   Disable the keys owned by the owner
*   Operate through menu-guided programming
*   Program a replacement remote
*   Complete database software containing all the major vehicle brands

The CK100 is not as durable as it’s supposed to be. It will die after a few months of use. Also, it doesn’t work on all vehicle brands and models. The advertised information on Autonumen may be misleading as the CK100 cannot program the 2001 Honda Accord or Acura. Some Toyota models are also not supported.

Which to Buy: Autek Ikey820, VVDI, or CK100?

Let’s look at the similarities and differences of the tools in the detailed comparison below:

Transponder key programming

Transponders were introduced in the late 1990s to improve car security. This involved embedding chips in the car keys, which emit signals to communicate with your car IMMO system. The car will never start if an incorrect signal sequence is received, even if you can flick the mechanical switch on the ignition.

Replacing car keys with transponders has since become a problem, requiring advanced car key programmers. Autek Ikey820, VVDI, and CK100 are all having this capability. With any of them, you can program transponder keys in just a few steps. All of them have a compact and lightweight design, making them portable.

If you need a car key programmer for personal use, a cheaper VDDI is recommended. But if you are a locksmith, go for a more advanced Autek Ikey820, even if you have to pay more for it.

Key fob chip programming

Key fobs are small remotes that can be used for opening car doors, trunks, and even igniting engines. If you need to pair such keyless devices to your car IMMO systems, you need a reliable universal key programmer. With the right choice of this tool, you can program a key fob to work with many car models.

Autek Ikey820, VVDI, and CK100 all have this functionality. You will only be limited by what you have on the budget. Also, the intended use of the car key fob programmer tool. For locksmiths who need more than just key fob programming, we recommend Autek ikey820. Do you need anything cheaper and portable for personal use? CK100 key fob programmer is your answer.

Erasing key

Erasing the car key involves removing its data from your car IMMO system. For this to work, the chosen car key programmer should access this information and delete it.
Autek ikey820 is a great choice if you need a more versatile key programmer with more functionsWith Autek ikey820, users can easily erase a car key.

Erasing a car key is crucial when you lose all keys. It is necessary to curb unauthorized access to your car. You can perform it with any of the car key programmers on our list. However, if you need a more versatile key programmer with more functions, Autek ikey820 is the best choice.

Programming a key when all keys lost

Some key programmers require at least one of the keys that came with your car to duplicate it or program other keys. Such programmers will not work in a situation where all keys are lost. The only way out of this problem is to buy a car key programmer that can read the IMMO system information.

Autek Ikey820, CK100, and VVDI key programmers can all read car key information from your car memories and use it to program new keys. This can be done in about two minutes. You can choose any of these programmers depending on your other needs.

Vehicle Coverage

Autek Ikey820 can program car keys from different manufacturers from America, Europe, and Asia. It covers car models up to those manufactured in 2017. CK 100 key programmer also supports a wide range of vehicles but is limited to vehicles manufactured in 2014 and below. VVDI can support some car models made in 2019, but you should check with your supplier before purchasing.

For a locksmith dealing with newer car models, Autek Ikey820 is a preferred choice. But if you have to deal with cars made after 2017, you can consider the VVDI key programmer to be the best option.

Best OBD2 Scanners with Key Programming

Some key programmers do more than just what their names suggest. This category of products has OBD2 diagnostic functions that can help you read your car’s engine status and operating conditions. You can also detect errors, clear error codes, and reset the data.

4. Launch CRP429C

The capability of this Launch CRP429C should never be understated. Apart from the IMMO capability, full OBD2 functions, and special functions, this tool can perform 4 system diagnoses. It is a more affordable choice for ABS, SRS, AT, and engine systems diagnosis. These diagnostic functions are supported for many car brands and models sold in the US, Europe, and Asian markets.

Launch CRP429C also has add-on functions that make it easier and more interactive to use. You can update the system software and APK in a single click if connected to the internet. It also has print functions for generating diagnosis reports and auto VIN detection for model and year of make.

Also, the Launch CRP429C diagnostic tool allows you to perform 11 reset functions, which include the following:

*   Oil Lamp Reset
*   Brake Pad Reset
*   TPMS Reset
*   Battery Matching
*   Injector Coding
*   Throttle Adaptation
*   DPF Reset
*   Gear Learning
*   Steering Angle Reset
*   ABS Brake Bleeding
*   Anti-Theft Matching

The Launch CRP429C is slower in some vehicle brands and models. The high-speed connection is not consistent and is sometimes dropped while streaming live data.

The tool also has loose connectors, meaning you have to carefully inspect connections before using the tools. You may also not be pleased with the redundancy of the keypad and touchscreen.

5. Autel MK808

If you are looking for more than just an auto key programmer, Autel MK808 is your best bet. The tool can perform complete system diagnoses. It is the best choice for testing the engine systems and troubleshooting any emission-related problems.

The Autel MK808 is a professional tool designed for ease of use, speed, and functionality. You don’t have to be an experienced mechanic to diagnose your vehicle as one. With its 7-inch LCD screen and intuitive user interface, it is a breeze to operate. It is the most advanced scanner that supports US, European, and Asian brands with OBD2 systems. Autel MK808 supports most car brands manufactured after 1996.

Buy Autel MK808 to diagnose engine, transmission, SRS, EPB, chassis, steering, ABS, and other vehicle systems. It is also equipped with 25 service functions, making it a complete tool for an experienced mechanic.

The Autel MK808 is a very powerful key programmer. However, you need subscription fees after the first year of use to continue receiving the updates. That can potentially increase the price of the tool over long-term use. Also, the upfront cost is high.

The Autel MK808 uses an external battery. It’s upon you to keep this battery charged. Otherwise, you’ll not use the tool. Exotic vehicles are also not supported by the Autel MK808. And being a professional tool, beginners might find it challenging to use.

6. Launch CRP909E

The Launch CRP909E is an equally advanced auto diagnostic tool, an upgrade to the more cost-effective Launch CRP429C. This is an all-in-one tool that can perform a complete system diagnosis. It is also a full OBD2 scanner, equipped with 16 special service functions and IMMO capability.

Launch CRP909E diagnostic tool allows you to read live data for engine, transmission, chassis and safety control system, body control system, and communication and entertainment system. It can perform all these functions on over 57 car brands and 1000+ models across the world. This Launch CRP909E also supports some of the newest cars manufactured in 2018, 2019, and 2020.

Performing vehicle diagnosis with Launch CRP909E is a breeze, thanks to the 7-inch LCD touchscreen and a high-speed quad-core processor. You will get all data in real-time and without lags. It is the best tool for a great visual experience.

The Launch CRP909E is quite heavy, weighing up to 9.15 pounds. That can limit the one-hand operation and portability. The tool also doesn’t have as many special service functions as other vehicle diagnostic tools within this price range.

Despite the one-year free update, paying for subsequent updates may be expensive. You may find it unreasonable to keep updating the firmware if you buy it just for home mechanics.

Which to Buy: MK808, CRP909E, or CRP429C?

Let’s look at the similarities and differences of the tools in the detailed comparison below:
Key programming ability

All these key programmers are at par when it comes to car key programming capability. You can use them to deactivate lost keys and duplicate car keys when all keys are lost. They are a complete tool for car key programming. Whether you are a car/truck owner, dealer, or locksmith, these tools are essential.

Launch CRP909E key programmer offers you the most affordable option. Therefore, recommended to those that do not have to deal with many different models. However, you need to inquire and confirm that your vehicle is supported before buying.

OBD-II diagnostic functions

Apart from reading and clearing fault codes, these devices can perform other OBD-II diagnostic functions. They can display live data, freeze data frames, perform IMMO functions, and monitor other car systems.

Fortunately, Autel MK808, Launch CRP909E, and Launch CRP429C can perform all the mentioned OBD-II diagnostic functions. Launch CRP909E is preferred if you are a professional mechanic dealing with car system diagnostics and key programming on a regular basis. If you just need an affordable product for personal use, then we recommend buying Launch CRP429C.

Advanced system diagnostics

System diagnostics should be done accurately for the smooth operation of the car. These vehicle diagnostic tools can help you monitor the fuel system, engine light, communication and entertainment system, transmission system, etc.

If you need a versatile car key programmer that will allow you to perform all these functions, go for Launch CRP429C. This is a complete tool designed to meet your every need.

Advanced service functions

Beside key programming, vehicle diagnostic devices can reset many system parameters. On the list, we have oil count reset, battery registration and reset, service mileage reset, steering angle reset, etc. Autel MK808, Launch CRP909E, and Launch CRP429C have all these capabilities. This means your choice will be limited by your budget and other features you need.

Launch CRP909E is a complete package that we recommend to every car owner or mechanic who can benefit from its many features.

Vehicle coverage

All the products listed here have support for wide vehicle brands and models. What you buy will depend on the intended use. As an auto mechanic/technician who interacts with many different models, both new and old, we recommend Launch CRP909E.

Final Thoughts

Finding the most reliable car key programmers in the market is an overwhelming task. We presented all the features that you should be looking for and offered our recommendations. If looking for a vehicle diagnostic tool with OBD2 functions, we would recommend Launch CRP429C. It is compatible with many vehicle models manufactured between the year 1996 and 2020.

Locksmiths, however, need a key programmer that is not overly complicated. VVDI is the recommended choice because of its affordability yet can perform as many key programming functions as other devices.

Have you heard of the XTOOL X100 Pad2 and want to know more? Maybe you spent hours trawling review pages reading up on the great key programming tools options, their features, and functions? We know there are loads of options on the market, and choosing one can seem like a daunting task.

Buying a car key programmer can be confusing. Not only do these tools offer a wide range of functionality, but you will also need to choose a unit compatible with the model of car you wish to work on. You will also need to ensure that the programmer is up-to-date, (and has the capacity to keep that way). Luckily, the Xtool X100 Pad2 is able to program nearly all vehicle models and key types including blade, wireless and fobs.

Xtool X100 Pad 2 Reviews
—The Autonumen shop was officially authorized, and it is the original brand. In saying that, it’s always a good idea to buy from a renowned brand. Also, XTool is a household name in the OBD business, and you can trust that their products will deliver quality, durability, and cover a wide range of functions. Their scan tools are great quality, long-lasting scanners.

—–Activation the Xtool X100 Pad2 is made super easy with. Just follow these simple steps to activate the Xtool:
First, connect your Xtool X100 2 to your network/wifi
Power up the and you’ll see the main interface appear on the screen
Press login to account and login with your e-mail address
You will also be required to enter an “activation code” which you can find printed on the user manual
Once you’ve complete all the necessary information just click the “ACTIVATE” button
The activation will bring up the X100 2 pad main menu, and you’re ready to go!

—-The activation of your device is a one time process, once you’ve completed it the XTool Pad 2 will save all your information ready for next time.

—-The Xtool X100 Pad two is capable of being used to perform OBD II scanner operations by reading codes and recognising issues with a vehicle.

—-The simple interface is easy to navigate, Once you’ve activated your Xpad 100 2 tool using it is a breeze. It comes down to using the device, the simple interface takes all the stress out of key programming and vehicle diagnostics.

—I am looking for tool that can function as a key programming tool and perform an OBDII diagnosis on my vehicle, a multi-functional tool such as the one covered in this review won’t let me down.

—Obviously, the XTool X100 Pad2 goes beyond single use functionality and combine a variety of tools into one, easy to use tool. This is a great option is I am willing to spend the money and want a guarantee that t he investment will perform well and last for a long time.

XTOOL X100 PAD 2 Specifications:

Product Overview:
Personalized Operation Interface
Brand-new interaction design interfaces and detailed operation reminder. Make operation easy and more obvious.

Auto Upgrade Notice
Upgrade notifications can be sent automatically. One-click update via wifi makes machine keep the latest syetem status at all times.

Hign-end Appearance
Simple and hign-end appearance, it is more durable with a protective case

Online Material Inquiry
A large amount of technical material can be inquired online.

X100 PAD2 is the first tablet key programmer in the world! It not only provides customers with professional key programming, but also the most needed special functions for workshop. Car Diagnostic Tool X-100 PAD2 is a tablet with the latest technologies to perform key programming, mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset, EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis.

Tested report: Yanhua Digimaster3 can correct odometer for Hyundai Santa FE 2018.
one chip type is MB91F067BS and another chip is HI26.

Digimaster III is capable of changing mileage on this model. But it doesn’t have wiring diagram. Need to find yourself wiring connections.

Then follow this path to correct mileage.
Programmer- CPU Program- MB91Fxx

Save data, send data, original mileage and mileage you desired directly to Yanhua technician. They will modify data for you.
loading..

Here comes the solution to VXDIAG VCX SE Benz or Benz C6 DoIP WIS EPC software “Unknown LAN ID” problem.

I need to get WIS EPC activated. But when ready to paste the LAN ID to generate license key (Startkey),  the page indicates “Unknown LAN ID” in the MAC address field,  and apparently the EWA net server cannot match it with the license key.

Solution:

1.Check NIC Driver.

2. Open “Computer Management”

3. Right click “Device Manager” to select “Show hidden devices”

4. Delete All Tunnel Adapters “Microsoft ISATAP Adapters” (all virtual network card drivers with #) “Teredo Tunnering Pseudo-Interface”.

Or contact www.obd2tool.com technical support via Teamviewer.

JPRO Professional is an all makes and models diagnostic and repair tool that improves shop efficiency, helps fleets maximize uptime, and empowers technicians of all skill levels to manage complicated repairs with ease

With coverage of all makes and models, plus industry-leading bi-directional controls, JPRO helps technicians find and fix all issues on a truck.

JPRO software includes an embedded troubleshooting module, Fault Guidance, and if you need the NEXTSTEP Software ,you can buy it separate on the official website , a repository of repair manuals and step-by-step instructions for repairing fault or symptom-based issues across all engine makes and models.

Some question about Jpro heavy truck diagnostic tool as following :

1:A: So this won’t work on windows vista then? Just need a yes or no
Q: No, Windows Vista is not supported.

2: A: How long does that software last before I have to buy a renewal of software?
Q：JPRO Professional software is an annual renewal.

If you want to learn more Jpro professional heavy truck diagnostic tool ,you can contact with us :sales@obdii.shop

JPRO Professional Truck Diagnostic Scan Toolbox Plus lenovo T420 laptop 2021 v2.2 Commercail Vehicle diagnostic tool

JPRO Professional Truck Diagnostic Scan Toolbox Plus Panasonic CF19 I5 4GB Laptop

JPRO Heavy-duty Medium-duty truck scanner Professsional Truck diagnostic scan tool Noregon JPRO DLA + 2.0 Adaoter kit

Tutorial: how to activate/register Xentry and update vxdiag benz multi tool vci firmware.

The procedure can be applied to:
VXDIAG Benz C6 doip
OEM Benz C6 using VXDIAG solution
Xentry DAS does not require activation. Ready to use.
DTS Monaco engineer software requires USB connection with vxdiag c6 and laptop
EPC WIS requires activation.

How to activate Vxdiag Benz C6 EPC WIS Software?

Open WIS-EPC admin12345 on desktop

Enter User name: admin and password: 12345

Open EWS-net brower

Select Administration->Server->Edit the access authorization

Find WIS/ASRA activation Startkey in Tools folder. Copy and paste ID and activation key to corresponding area. Then press Save.

Note: If it shows unknown LAN-ID error when open EPC-WIS brower, it indicates that you did not install NIC driver. Or uninstall and reinstall NIC driver again.

Go to Programs to check activation status

Activation is done. EPS and WIS successfully registered.

Update Benz C6 VCI Firmware

Open VX Manager driver on desktop

Go to Diagnostic to install Benz driver

Choose Benz program and install benz C6 driver

Press Firmware to run VCI update

Updating vci firmware in progress. Wait until it finished.\

VXDIAG C6 Benz multi tool is ready to use.

Compare to previous X-prog, Launch Xprog 3 supports EEPROM read &write and gearbox reading. Here we’re gonna bring you a brief demo of VW 2011 gearbox cloning with Launch X431 Pad VII.

Procedure:
First complete the connection of Pad VII, Smartlink C and X-prog 3 by cables.

Turn on Launch Pad VII,
Select
IMMO PROGRAM>>Gearbox>>DQ200-MQB

Now we are on display menu.
Click on “View the connection”.

Connect VW gearbox to X-prog 3 key programmer by the diagram.

Select “Connect” to make sure the system is connected.

Then we back up original EEPROM and FLASH data.
Disconnect and remove the original gearbox and put the new one into connection.
Also we back up its EEPROM and FLASH data.
Then click on “Restore EEPROM data” and “Restore FLASH data”,
Load original EEPROM and FLASH data to write them into the new gearbox.
Compare two gearboxes’ data to make sure everything is correct.

Get into the car,
Clear DTCs and take a general scan.
In system list,
Select “02 Electronic product”.
Here we can see the VIN is correct.

Confirm to enter function menu.
Select “02 Fault code reading”, No error codes.

Done!

That’s how we clone VW 2011 gearbox by Launch Pad 7 and Launch X-prog 3.